When your engine contains a small amount of oil, which can lead to engine damage, as a result of increased friction between the engine parts, which makes some people think that adding more oil can make their engine perform better, but what happens when Increase the amount of engine oil?
When there is a lot of oil it creates foam, which turns the slippery lubricant into a liquid through the presence of air bubbles that reduce viscous properties, and it is difficult for the oil pump around the engine to distribute the foamy oil, which makes some moving parts not receive the amount of oil needed, thus increasing wear and the risk of engine damage.
Excessive amount of oil increases oil pressure, which increases pressure on the seals and gaskets that prevent the oil from leaking from the engine or going to other places where it should not be, and over time, the additional pressure increases the wear of those seals
Park your car on level ground before checking the oil to ensure an easy and accurate reading.
Give the car about 1:2 minutes for the oil to settle.
Avoid handling a very hot engine, and allow the engine to cool slightly.
Make sure your car is off, whether you're checking the engine warm or cold.
Pull out the oil test tool and clean it with a clean, light-coloured cloth.
Put the oil test tool back into the oil, and then pull it out again.
The oil must be between the “Max: Min” marks on the oil dipstick, and if the oil drops below the “Min” mark, this means that the engine is in a state of more oil, but if the oil level is slightly higher than the “Min” mark. Max" will not cause problems.
0 comments: